Amanda's Creative Corner Crochet · Kitchen
Free Crochet Patterns Handmade with Love

Black and Burgundy Rose Medallion Bed Cover Crochet Pattern

Jump to Pattern
Black and Burgundy Rose Medallion Bed Cover Crochet Pattern
240-270 Hours 0 made this
Intermediate Level

You need spokes of double crochet, rings of single crochet, a layered rose and a join-as-you-go shell edge.

About 255 Hours

Each medallion with its rose takes about an hour and a half, so a few a week grow into a dramatic bed cover.

A Rose In Every Web

Each black lace web holds a raised burgundy rose, so the whole bed blooms in deep, rich color.

About This Black and Burgundy Rose Medallion Bed Cover Crochet Pattern Pattern

This black and burgundy bed cover is bold, romantic and a little bit dramatic. It is made from round black lace medallions that look like delicate spiderwebs, with spokes running out from the center and rings circling around them. In the middle of every web sits a raised, layered rose in deep burgundy wine. A scalloped edge finishes each circle, and small burgundy stars fill the gaps where four circles meet. On the bed, the medallions form a striking grid of roses against black lace, with the burgundy stars sparkling between them like little jewels.

Each medallion is worked in rounds from the center out. You start with a black magic ring of double crochet, then alternate between spoke rounds and ring rounds. A spoke round is made of double crochet with chain spaces between them, and a ring round fills those spaces with single crochet. Each spoke round has longer chains than the last, so the web grows evenly. In the outer spoke round, you double the number of spokes, which gives the outer web its fine, lacy look. A final round of shells creates the scalloped edge and is also where the medallions join to each other.

The rose is made separately in burgundy. It starts with a small ring of single crochet, then builds three layers of petals. Each layer has four petals, and each new layer is worked behind the one before it on longer chain loops, so the petals grow bigger as you go. This gives the rose a full, cupped shape that stands up from the lace. Once the rose is finished, you sew it onto the center of the medallion with the long tail. The raised petals catch the light beautifully and make every medallion look like a little brooch.

The finished bed cover measures about 96 by 104 inches. That is 12 medallions across and 13 medallions down, which makes 156 medallions, 156 roses and 132 star fillers. Each medallion is about 8 inches across after blocking. On a queen bed, the cover lies across the top and drops about 18 inches on each side and about 24 inches at the foot, with the scalloped edge reaching toward the floor on most frames. I used DK weight matte cotton with a 3.5 mm hook, which gives fine, crisp lace and well-shaped roses.

The finished cover has a lovely light drape, because the lace webs are open and airy. The roses add texture and weight in the centers, so the cover settles nicely over the bed. Black and burgundy is a rich, elegant combination that feels warm and luxurious, especially in a bedroom with white walls, mirrored furniture or crystal lamps. It looks wonderful in autumn and winter, and it brings a touch of drama to a calm, neutral room. Because the colors are deep, the cover also hides small marks well, which makes it practical as well as pretty.

This pattern suits an intermediate crocheter who is comfortable working in rounds and counting chain spaces. The medallion has eight simple rounds, and the rose uses only basic stitches. Joining as you go takes a little attention at first, because each medallion links to its neighbors at specific shells, but after the first row it becomes natural. Black yarn can be harder to see, so work in good light and use stitch markers. Every piece is small and light, so you can make roses on the go and save the medallions for quiet evenings at home.

Black and Burgundy Rose Medallion Bed Cover Crochet Pattern step detail

Why You'll Love This Black and Burgundy Rose Medallion Bed Cover Crochet Pattern Pattern

I love this bed cover because it is so different from anything else I have made. Most of my bed covers are soft and pastel, but this one is bold and moody, like something you would find in an old castle or a fancy hotel suite. The deep burgundy roses against black lace feel romantic and a little mysterious. Every time I walk into the bedroom and see it on the bed, it makes me stop and smile. It turns a plain white room into something really special.

The roses are my favorite part. I have always loved making crochet roses, and these are so satisfying. You start with a tiny ring, and with each layer the rose opens up a little more. By the third layer, it looks full and real, with petals that curl and catch the light. I made my roses in batches while watching movies, and I kept them in a little bowl on my side table. Seeing a whole bowl of burgundy roses was a joy on its own.

I also love how the lace medallion grows. The spoke and ring rounds have a lovely rhythm, and you can see the web take shape round by round. The center looks simple, but by the time you add the double spokes and the shell edge, it becomes delicate and intricate. When you sew the rose into the middle, the whole piece comes alive. It is a small moment of magic that happens with every medallion.

  • A bold, romantic color pairing that stands out.
  • Raised roses that add rich texture.
  • Joined as you go at the shells, with no long seams.
  • Small pieces that are easy to carry and make in batches.

This cover also makes a wonderful gift for someone who loves rich, dramatic colors. I made a small throw version for my niece, who loves gothic and vintage style, and she keeps it on her reading chair. People always notice it. They lean in to touch the roses and ask how long it took. A handmade bed cover like this tells a story, and it feels like an heirloom from the very first day you put it on the bed.

Making this cover taught me a lot. I learned to work in good daylight when using black yarn, and to use bright stitch markers so I never lose my place. I learned to sew the roses on carefully so they sit straight in every medallion. And I learned that a bold color choice can be just as beautiful as a soft one. If you want a striking, romantic project that will make a real statement in your bedroom, I think you will love this one.


Switch Things Up

The first and easiest change is the color. Black and burgundy is bold and romantic, but this design works in many pairings. Cream medallions with blush pink roses look soft and vintage. White medallions with red roses feel classic and cheerful. Navy medallions with ivory roses look elegant and calm, and charcoal grey with dusty rose makes a modern, muted version. You can also make the star fillers in a third color, such as gold or sage green, to add a little sparkle between the medallions.

You can make this bed cover for any bed size by changing the number of medallions. Each medallion is about 8 inches across, so divide your bed width and length, including the drop, by 8. Here are the counts I use:

  • Twin: 10 by 12 medallions, 120 medallions and 99 star fillers, about 80 by 96 inches.
  • Full: 11 by 12 medallions, 132 medallions and 110 star fillers, about 88 by 96 inches.
  • Queen: 12 by 13 medallions, 156 medallions and 132 star fillers, about 96 by 104 inches.
  • King: 14 by 13 medallions, 182 medallions and 156 star fillers, about 112 by 104 inches.

For a sofa throw, join 6 medallions across and 7 down. That is 42 medallions and 30 star fillers, and it finishes at about 48 by 56 inches. A throw is a great way to try the pattern before committing to a whole bed cover. It looks beautiful draped over a dark leather chair or folded at the foot of a bed. If you make a medallion and a rose most evenings, you can finish a throw in about two months, and it makes a striking gift.

A table runner is a lovely smaller project. Join 2 medallions across and 6 down for a runner about 16 by 48 inches, using 12 medallions and 5 star fillers. In black and burgundy, it makes an elegant centerpiece for a dinner table, especially with candles and dark flowers. In cream and blush, it looks sweet for a wedding table or a spring brunch. Runners are quick to finish and a great way to use leftover yarn.

You can also leave out the roses for a lighter look. Without the roses, the medallions become pure spiderweb lace, which looks delicate and airy. You could also replace the roses with a different center, such as a small puff flower, a button or a beaded cluster. Another idea is to alternate medallions with roses and medallions without, in a checkerboard. That gives the cover more rhythm and saves time and yarn.

To make matching pillow covers, join 3 medallions across and 2 down for a panel about 24 by 16 inches, with 2 star fillers, which fits a standard pillow sham. Make two panels and join them around the edges with chain loops, then slip in the pillow before closing the last side. Choose a pillow insert in black or burgundy so the lace openings show a matching color instead of white. Matching pillows make the whole bed look planned and finished.

Finally, try a different yarn weight. In fine sport weight cotton with a 3 mm hook, each medallion is about 7 inches across, so a queen needs about 14 by 15 medallions, and the lace looks even more delicate. In worsted weight cotton with a 4.5 mm hook, a medallion grows to about 10 inches, and a queen needs only about 10 by 11 medallions. Worsted gives bigger, bolder roses. Always make one test medallion with its rose in your chosen yarn and block it before planning your layout.


Materials Needed

— Main Fabric

01 DK weight (3) matte cotton yarn in black: about 2,350 g (about 5,600 yards) for 156 medallions (about 14 g each) and about 120 g for the border
02 DK weight (3) matte cotton yarn in deep burgundy wine: about 1,000 g (about 2,400 yards) for 156 roses (about 5 g each) and 132 star fillers (about 1.5 g each)
03 Buy about 10 percent extra of each color from the same dye lot

— Tools Required

04 3.5 mm (US E-4) crochet hook
05 Yarn needle for sewing on roses and weaving in ends
06 Bright stitch markers (easy to see on black yarn)
07 Sharp scissors
08 Blocking mats and rust-proof pins
09 Measuring tape

The Free Pattern

Intermediate 240-270 Hours

0% complete

— Spiderweb Medallion (Make 156, black) :

Make one test medallion and block it. It should measure about 8 inches across from scallop tip to scallop tip. Work in good light and use bright stitch markers on the black yarn.
Rnd 1: MR, ch 3 (counts as dc), 15 dc in ring, pull ring closed, sl st in top of beg ch-3 to join. (16 dc)
Rnd 2: Ch 6 (counts as dc and ch 3), *dc in next dc, ch 3; rep from * around, sl st in 3rd ch of beg ch-6 to join. (16 dc, 16 ch-3 sps)
Rnd 3: Ch 1, *sc in next dc, 3 sc in next ch-3 sp; rep from * around, sl st in first sc to join. (64 sc)
Rnd 4: Ch 7 (counts as dc and ch 4), sk next 3 sc, *dc in next sc (above a spoke), ch 4, sk next 3 sc; rep from * around, sl st in 3rd ch of beg ch-7 to join. (16 dc, 16 ch-4 sps)
Rnd 5: Ch 1, *sc in next dc, 4 sc in next ch-4 sp; rep from * around, sl st in first sc to join. (80 sc)
Rnd 6: Ch 5 (counts as dc and ch 2), sk next sc, *dc in next sc, ch 2, sk next sc; rep from * around, sl st in 3rd ch of beg ch-5 to join. (40 dc, 40 ch-2 sps)
Rnd 7: Ch 1, *sc in next dc, 2 sc in next ch-2 sp; rep from * around, sl st in first sc to join. (120 sc)
Rnd 8: Ch 1, sc in same st, *sk next 2 sc, 7 dc in next sc, sk next 2 sc, sc in next sc; rep from * around, ending with sk 2 sc, 7 dc in next sc, sk last 2 sc, sl st in first sc to join. Fasten off. (20 shells of 7 dc, 20 sc)
Number the shells 1 to 20 clockwise, so the top of the medallion falls between shells 20 and 1, the right side between 5 and 6, the bottom between 10 and 11 and the left side between 15 and 16. The center of each shell is its 4th dc.
Join as you go (from Medallion 2 on): work Rnd 8 as written, but at a shell that touches a finished medallion, work 3 dc, drop the loop, insert the hook in the 4th dc of the matching shell, pick up the dropped loop and pull it through, then work 4 dc to complete the shell. The stitch count does not change. To the medallion on the left, join shell 16 to its shell 5 and shell 15 to its shell 6. To the medallion above, join shell 1 to its shell 10 and shell 20 to its shell 11.

— Layered Rose (Make 156, burgundy) :

Rnd 1: MR, ch 1, 8 sc in ring, pull ring closed, sl st in first sc to join. (8 sc)
Rnd 2: Ch 1, *sc in next st, ch 3, sk next st; rep from * 3 more times, sl st in first sc to join. (4 sc, 4 ch-3 sps)
Rnd 3: *(Sc, hdc, 3 dc, hdc, sc) in next ch-3 sp; rep from * around, sl st in first sc to join. (4 petals, 28 sts)
Rnd 4: Working behind the petals, *sc around the post of the next sc from Rnd 2, ch 5; rep from * around, sl st in first sc to join. (4 sc, 4 ch-5 sps)
Rnd 5: *(Sc, hdc, 5 dc, hdc, sc) in next ch-5 sp; rep from * around, sl st in first sc to join. (4 petals, 36 sts)
Rnd 6: Working behind the petals, *sc around the post of the next sc from Rnd 4, ch 7; rep from * around, sl st in first sc to join. (4 sc, 4 ch-7 sps)
Rnd 7: *(Sc, hdc, 7 dc, hdc, sc) in next ch-7 sp; rep from * around, sl st in first sc to join. Fasten off, leaving a 12 inch tail for sewing. (4 petals, 44 sts)
Gently cup the petals with your fingers, then sew the rose to the center of a medallion, stitching through Rnd 1 of the medallion and around the back of Rnd 6 of the rose so it sits firmly and stands up from the lace.

— Star Filler (Make 132, burgundy) :

Each star sits in the gap between four medallions. Work it after the four medallions around the gap are joined.
Rnd 1: MR, ch 1, 8 sc in ring, pull ring closed, sl st in first sc to join. (8 sc)
Rnd 2: Ch 1, *sc in next st, ch 4, sl st in the 4th dc of the next diagonal shell around the gap, ch 4, sc in next st; rep from * 3 more times, joining in turn to shell 8 of the upper left medallion, shell 13 of the upper right medallion, shell 18 of the lower right medallion and shell 3 of the lower left medallion, sl st in first sc to join. Fasten off. (8 sc, 4 joining lps)

— Layout :

The queen layout is a straight grid of 12 columns by 13 rows: 156 medallions, each with a rose. Work row by row from the top left corner, joining each new medallion to the one on its left and the one above.
The grid leaves 11 by 12 gaps between medallions, for 132 star fillers. Add the stars as each row is finished.
Around the outside there are 46 medallions with 388 open shells facing outward: 8 on each edge medallion (shells 17 to 4 on the top edge, turning around the medallion on the other edges) and 13 on each corner medallion.

— Border (black) :

Border Rnd 1: Join black in the 4th dc of any outward-facing shell, ch 1, sc in same st, *ch 5, sc in the 4th dc of the next outward shell of the same medallion; at each change from one medallion to the next, ch 7 instead of ch 5 across the join; rep from * around, sl st in first sc to join. (388 sc, 342 ch-5 sps, 46 ch-7 sps)
Border Rnd 2: Ch 1, sc in each sc, 5 sc in each ch-5 sp and 7 sc in each ch-7 sp around, sl st in first sc to join. Fasten off. (2,420 sc: 388 plus 1,710 plus 322)
For other sizes, count 8 outward shells on each edge medallion and 13 on each corner medallion; there is one ch-7 bridge for every outer medallion.

Assembly Instructions

  1. Make one Spiderweb Medallion and one Layered Rose, block the medallion and check that it measures about 8 inches across.
  2. Make the medallions row by row, joining each new one to the medallion on its left and the medallion above with the join-as-you-go shells.
  3. After each row is joined, work a Star Filler in every gap, linking it to the four diagonal shells around it.
  4. Continue until the grid is 12 medallions across and 13 down.
  5. Sew a Layered Rose to the center of every medallion with the long tail, keeping all roses straight and firm.
  6. Work Border Rounds 1 and 2 around all 46 outer medallions.
  7. Block the finished bed cover flat, pinning the outer scallops evenly, and let it dry completely without pressing the roses.

Common Mistakes & How to Fix Them

The most common mistake is losing your place on black yarn and miscounting the spokes. Black stitches are hard to see, especially in the evening, and it is easy to skip a stitch in the spoke rounds. If one spoke is missing, the web pulls to one side and the medallion becomes oval. Always work in good daylight or under a bright lamp, and place a bright stitch marker in the first spoke of each round. Count the spokes and the stitch total at the end of every round. If a count is off, fix it before starting the next round.

Another mistake is pulling the chain spaces too tight in Rounds 2, 4 and 6. When the chains are short or tight, the web cups like a bowl and the shell edge ruffles. This often happens when you crochet tightly to keep lace neat. Chain at a relaxed tension so each chain space lies flat between the spokes. Lay your medallion on a table after Round 5. If it cups, go up half a hook size for the spoke rounds. If it ripples, go down half a size. A flat web makes a smooth, even bed cover when all the medallions are joined.

Many makers sew the roses on loosely or off center, so they lean or flop after washing. A loose rose tilts to one side and can catch on things, and an off-center rose makes the grid look messy. Sew each rose through Rnd 1 of the medallion and around the back of the rose's Rnd 6 posts in at least eight places, all the way around. Check that the rose sits right over the magic ring before you knot the tail. Secure the tail firmly on the back and weave it in through the black stitches so it does not show.

The last common mistake is joining at the wrong shells, so the rows twist and the star gaps change size. Each medallion joins its shells 15 and 16 to the shells 6 and 5 on its left, and its shells 20 and 1 to shells 11 and 10 above. If you join one shell early or late, the next medallion tilts, and the stars will no longer fit. Before starting Round 8, place stitch markers in shells 1, 5, 10 and 15 of your work in progress. Then match marker to marker. If a join looks wrong, undo that medallion's last round and rejoin it.


Denise

Denise is a crochet designer who loves turning lace medallions and crochet roses into cozy heirloom bed covers and home pieces.



Important Notes

Gauge matters because small differences add up across 156 medallions. A blocked medallion should measure about 8 inches across from scallop tip to scallop tip. If yours is a quarter inch larger, the bed cover will grow by 3 inches across and more in length. Make one test medallion and one rose before buying all of your yarn. Compare new medallions with your first one every few weeks, because tension often changes during a long project.

Blocking opens up the spiderweb lace and makes the scallops crisp. Pin each medallion flat in a circle before joining, or block the whole cover after joining, placing a pin in every outer scallop. Mist with cool water and let it dry completely. Do not press or pin the roses, because they should stay raised and full. You can gently cup each rose with your fingers while the cover is still damp to keep its shape.

The yarn amounts are for the queen size in DK weight cotton, so adjust them for other sizes or yarns. Buy all of each color from the same dye lot, plus about 10 percent extra. Black can range from soft charcoal to deep jet between lots, and burgundy can lean red or purple, so differences show clearly. If you must use two lots, mix medallions or roses from both lots evenly across the grid.

Wash the bed cover by hand or on a gentle cold cycle inside a large mesh laundry bag. Dark dyes like black and burgundy can release color, so wash the cover on its own and add a color catcher sheet to every wash. Use a mild detergent made for darks, and no bleach. Do not hang the cover to dry, because wet cotton is heavy and will stretch the lace. Lay it flat on towels, reshape the medallions and roses and let it dry fully.


I hope this black and burgundy rose medallion bed cover brings a touch of romance and drama into your bedroom. It is a big project, but every medallion and every rose is a small, satisfying step. Take your time, work in good light and enjoy watching each little web bloom with its burgundy rose.

You do not have to think about all 156 medallions today. Just make one rose this evening and one medallion tomorrow, then sew them together. Before long, you will have a growing stack of roses in lace, and one day they will cover your whole bed in rich, beautiful color. Happy crocheting, my friend.

Crochet Abbreviations

01 ch — chain
02 sc — single crochet
03 hdc — half double crochet
04 dc — double crochet
05 sl st — slip stitch
06 MR — magic ring
07 beg — beginning
08 sk — skip
09 st(s) — stitch(es)
10 lp(s) — loop(s)
11 sp(s) — space(s)
12 rep — repeat
13 Rnd — round

You Ask, We Answer

What is the finished size of this bed cover?

The queen version finishes at about 96 by 104 inches after blocking. That is 12 medallions across and 13 medallions down, with each medallion measuring about 8 inches across from scallop tip to scallop tip. On a standard queen mattress, the cover lies across the top and drops about 18 inches on each side and about 24 inches at the foot, so the scalloped edge reaches toward the floor on most bed frames. If your bed is taller or you want a longer drop, add one more medallion to each row and column. If you prefer a coverlet that stops at the side of the mattress, use the full layout of 11 by 12 medallions. Measure your own bed, including the mattress and frame height, and divide by your blocked medallion size before buying your yarn.

Can I use a different yarn weight or make a different size?

Yes, this pattern works in many yarn weights because the medallion and rose are the same in every size. In fine sport weight cotton with a 3 mm hook, each medallion is about 7 inches across, and in worsted weight cotton with a 4.5 mm hook it grows to about 10 inches. The stitch counts never change, only the size of each piece and the number of medallions you need. Make one test medallion and rose in your chosen yarn, block the medallion and measure it, then divide your bed size by that number. The section on switching things up lists counts for twin, full, queen, king, a throw and a table runner. For the border, count 8 outward shells on each edge medallion and 13 on each corner medallion, with one bridge between each pair of outer medallions.

How do I wash and care for this crochet bed cover?

Wash it by hand in cool water or on a gentle cold cycle inside a large mesh laundry bag to protect the lace and the raised roses. Use a mild detergent made for dark colors and never use bleach. Because black and burgundy dyes can release color, wash the cover on its own and add a color catcher sheet to every wash, especially the first few. Do not wring or twist the cover. Gently press out the water, then lay it flat on clean towels, reshape the medallions and cup the roses with your fingers. Let it dry completely, away from direct sunlight, which can fade dark colors. Never hang it while wet, because the weight of the wet cotton will stretch the lace. Between seasons, fold it loosely and store it in a breathable cotton bag in a dark, dry place.