Amanda's Creative Corner Crochet · Kitchen
Free Crochet Patterns Handmade with Love

Rose Pink Wheel Ring Square Bed Cover Crochet Pattern

Jump to Pattern
Rose Pink Wheel Ring Square Bed Cover Crochet Pattern
150-180 Hours 3 made this
Intermediate Level

You need back loop double crochet, graded stitches to square a circle and padded single crochet rings.

About 165 Hours

Each large square takes about two hours, so a square a day finishes the whole bed cover in about two months.

Padded Ring Frames

A frame of round eyelet rings packed with single crochet gives every square a soft, bold outline.

About This Rose Pink Wheel Ring Square Bed Cover Crochet Pattern Pattern

This rose pink bed cover is made from large squares that look like soft pink wheels set inside frames of round rings. In the center of every square sits a small raised ring. Around it, a wheel of eight wedge-shaped sections grows outward, each one lined with gentle ridges and separated from the next by an open spoke line. The wheel is squared off with graded stitches, then framed with a row of padded round eyelet rings, with a teardrop ring at every corner. The squares join in a straight grid, and a scalloped edge of big padded rings finishes the cover and hangs softly over the sides of the bed.

Each square is worked in rounds from the center out. You begin with a small magic ring of single crochet, then a round of double crochet and a round of single crochet that form the raised ring. Next, you divide the circle into eight wedges with short chain spaces between them. Every round, each wedge grows by two stitches, and because these rounds are worked in the back loops only, a little ridge forms on every round. That is what gives the wheel its lovely concentric lines, while the chain spaces stay open and create the spokes.

Once the wheel is full size, a shaping round turns the circle into a square. Tall treble crochet stitches build up the corners, and the stitch height steps down through double crochet, half double crochet and single crochet toward the middle of each side. Then you work a round of long chain loops around the square, and in the next round you pack each loop with single crochet. The loops turn into firm, round padded rings with open centers, and the corner loops become teardrop rings. A final round of single crochet outlines the square and gives a neat edge for joining.

The finished bed cover measures about 102 by 102 inches with the ring border. That is 8 squares across and 8 squares down, which makes 64 squares, each about 12 inches across after blocking. On a queen bed, the cover lies across the top and drops about 21 inches on each side and at the foot, with the ring scallops reaching toward the floor on most frames. I used worsted weight matte cotton with a 4.5 mm hook, which makes bold, round rings and clear ridges in the wheel.

The finished cover has a lovely weight and a soft drape. The wheels are solid and cozy, while the open rings and spoke lines keep it light and breathable. Rose pink is a warm, romantic color that brings softness and charm into a bedroom. It looks beautiful with beige and gold furniture, cream floors and fresh pink flowers. Because the whole cover is one color, the texture of the ridges and rings shows clearly, so it looks elegant and full of detail rather than busy.

This pattern suits an intermediate crocheter who is comfortable working in the round and in the back loops. The wheel rounds are calm and easy to memorize, and the ring rounds are surprisingly fun once you see the rings fill out. Because each square is large, you only need 64 of them for a queen bed, which makes this one of the quicker big bed covers to finish. Every square is still small enough to carry in a bag, so you can work on it wherever you are.

Rose Pink Wheel Ring Square Bed Cover Crochet Pattern step detail

Why You'll Love This Rose Pink Wheel Ring Square Bed Cover Crochet Pattern Pattern

I love this bed cover because it feels soft, sweet and a little bit playful. Rose pink is such a happy color. It reminds me of roses in early summer, pink sugar on birthday cakes and my grandmother's favorite tea cups. When this cover is on the bed, the whole room glows with a gentle warmth. It feels romantic without being too much, and it makes every guest smile the moment they see it.

The wheel is wonderful to make. The back loop rounds have such a calm, steady rhythm, and you can watch the little ridges appear one after another. The spoke lines look so neat and clean, and when the wheel reaches its full size, it looks like a sunburst or the top of a parasol. Squaring it off with the graded stitches feels like a little magic trick, because the round shape becomes a perfect square in just one round.

My favorite part is the padded rings. When you pack single crochet over the long chain loops, the loops plump up into soft, round rings that look like little donuts. They give each square a bold frame, and the open centers let light shine through. At the corners, the teardrop rings add a sweet finishing touch. When the squares are joined, the rings line up along every seam and make the whole bed look like it is trimmed with lace.

  • Only 64 large squares for a queen bed.
  • One color only, with just two ends per square.
  • Calm back loop rounds that create pretty ridges.
  • Plump padded rings that frame every square.

This cover also makes a lovely gift. I made a smaller throw for my niece's first apartment, and she says it is the coziest thing she owns. Pink is a wonderful choice for a girl's bedroom, a romantic guest room or a cheerful reading corner. A handmade bed cover carries so much love, and it becomes the kind of heirloom that is kept for many years and passed down with pride.

Making this cover taught me a lot. I learned how much texture you can get from simply working in the back loops. I learned to shape a circle into a square with graded stitch heights. And I learned to pack my rings evenly, so every ring is the same size and shape. If you want a soft, romantic bed cover with bold texture and fewer pieces to make, I think you will love this one.


Switch Things Up

The first and easiest change is the color. Rose pink is warm and romantic, but this square looks beautiful in many solid shades. Ivory or white gives it a classic vintage look. Soft lavender feels calm and dreamy. Sage green looks fresh and natural, and a soft sky blue is perfect for a coastal bedroom. For a two-color look, make the wheel in one shade and the padded rings in a slightly darker one, such as a blush wheel with rose rings, so the frames stand out even more.

You can make this bed cover for any bed size by changing the number of squares. Each square is about 12 inches across after blocking, and the ring border adds about 3 inches on every side. Here are the counts I use:

  • Twin: 6 by 8 squares, 48 squares, about 78 by 102 inches.
  • Full: 7 by 8 squares, 56 squares, about 90 by 102 inches.
  • Queen: 8 by 8 squares, 64 squares, about 102 by 102 inches.
  • King: 9 by 8 squares, 72 squares, about 114 by 102 inches.

For a sofa throw, join 4 squares across and 5 down. That is 20 squares and finishes at about 54 by 66 inches with the border. A throw is a wonderful way to try the pattern before making a whole bed cover. Because the squares are large, a throw comes together quickly, often in just a few weeks of evenings. It looks lovely folded over the end of a bed or draped across a sofa, and it makes a sweet gift.

A baby blanket is also lovely in this pattern. Join 3 squares across and 3 down for 9 squares, about 42 inches square with the border. Use a soft cotton or cotton blend in a gentle shade such as baby pink, mint or pale yellow. The padded rings are soft and fun for little fingers. Because the rings have open centers, use it as a stroller or decorative blanket with a grown-up nearby. A handmade baby blanket is a keepsake families treasure for years.

You can also use single squares in many ways. One square makes a beautiful pillow front or a centerpiece mat for a table. Join 2 squares by 4 for a table runner about 30 by 54 inches with the border. You could also make a smaller version of the square by stopping after Round 7, which gives a wheel about 9 inches across that works well as a placemat or doily. These small projects are perfect for using up leftover yarn.

To make matching pillow covers, use 2 squares joined side by side for a standard pillow sham front, about 24 by 12 inches, or one square for a small square cushion. Make a back panel in simple rows of double crochet the same size. Join front and back around three sides, slip in the pillow and close the last side. Add a narrow row of padded rings around the cushion to match the bed cover. Use a pink pillow insert so the rings show a matching color.

Finally, try a different yarn weight. In DK cotton with a 3.5 mm hook, each square is about 10 inches across, so a queen needs about 10 by 10 squares, and the rings look more delicate. In bulky yarn with a 6 mm hook, a square grows to about 15 inches, and a queen needs only about 6 by 6 squares. Bulky yarn makes very plump rings and a thick, cozy cover. Always make one test square in your chosen yarn and block it before planning your layout.


Materials Needed

— Main Fabric

01 Worsted weight (4) matte cotton yarn in rose pink: about 4,300 g (about 8,600 yards) for the queen size, covering 64 squares (about 60 g each), the seams (about 150 g) and the ring border (about 300 g)
02 Buy about 10 percent extra from the same dye lot for swatching and repairs

— Tools Required

03 4.5 mm (US 7) crochet hook
04 Yarn needle for weaving in ends
05 Stitch markers
06 Sharp scissors
07 Blocking mats and rust-proof pins
08 Measuring tape

The Free Pattern

Intermediate 150-180 Hours

0% complete

— Wheel Ring Square (Make 64, rose pink) :

The beginning ch 3 counts as a dc and ch 4 counts as a tr. Rounds 5 to 8 are worked in the back loops only (blo) to make the ridges. Make one test square and block it. It should measure about 12 inches across.
Rnd 1: MR, ch 1, 12 sc in ring, pull ring closed, sl st in first sc to join. (12 sc)
Rnd 2: Ch 3, dc in same st, 2 dc in each st around, sl st in top of beg ch-3 to join. (24 dc)
Rnd 3: Ch 1, sc in each st around, sl st in first sc to join. (24 sc: the raised ring)
Rnd 4: Ch 3, dc in next 2 sts, ch 2, *dc in next 3 sts, ch 2; rep from * around, sl st in top of beg ch-3 to join. (8 wedges of 3 dc, 8 ch-2 spoke sps)
Rnd 5: Ch 3, dc blo in same st, *dc blo in next st, 2 dc blo in last st of wedge, ch 2, sk ch-2 sp, 2 dc blo in first st of next wedge; rep from * around, ending with ch 2, sl st to join. (8 wedges of 5 dc, 8 ch-2 sps: 40 dc)
Rnd 6: Work as Rnd 5, with 2 dc blo in the first and last st of each wedge and dc blo in each st between. (8 wedges of 7 dc, 8 ch-2 sps: 56 dc)
Rnd 7: Work as Rnd 6. (8 wedges of 9 dc, 8 ch-2 sps: 72 dc)
Rnd 8: Work as Rnd 6. (8 wedges of 11 dc, 8 ch-2 sps: 88 dc)
Rnd 9: Sl st to first ch-2 sp, ch 4, (2 tr, ch 3, 3 tr) in same sp for the first corner, *tr in next 3 sts, dc in next 3 sts, hdc in next 3 sts, sc in next 2 sts, 2 sc in next ch-2 sp (middle of side), sc in next 2 sts, hdc in next 3 sts, dc in next 3 sts, tr in next 3 sts, (3 tr, ch 3, 3 tr) in next ch-2 sp; rep from * around, omitting the last corner, sl st in top of beg ch-4 to join. (120 sts: 30 sts on each side counted between corner sps, 4 ch-3 corner sps)
Rnd 10: Sl st to first corner sp, ch 1, *(sc, ch 9, sc) in corner sp, (ch 7, sk 5 sts, sc in next st) 5 times; rep from * around, sl st in first sc to join. (28 sc, 20 ch-7 lps: 5 on each side, 4 ch-9 corner lps)
Rnd 11: Sl st in first ch-9 corner lp, ch 1, *(6 sc, ch 3, 6 sc) in corner lp, 10 sc in each of the next 5 ch-7 lps, skipping the sc between the lps; rep from * around, sl st in first sc to join. (248 sc: 62 sc on each side counted between corner sps, 4 ch-3 corner sps)
Rnd 12: Ch 1, *(sc, ch 2, sc) in corner sp, sc in each sc across to next corner; rep from * around, sl st in first sc to join. Fasten off. (256 sc: 64 sc on each side counted between corner sps, 4 ch-2 corner sps)

— Layout :

The queen layout is a straight grid of 8 columns by 8 rows: 64 squares. All squares are the same, so they can face any direction.
Join: hold two squares wrong sides together and sc through both loops of both squares from corner sp to corner sp (66 sc per seam: 1 in each corner sp and 1 in each of the 64 sc). Join all rows first, then all columns, working right across the corners.

— Padded Ring Border (rose pink) :

Border Rnd 1: Join yarn in any sc on the outer edge, ch 1, sc in each sc around, 1 sc in each pair of joined corner sps at the seams and 3 sc in each of the 4 outer corner sps, sl st in first sc to join. (2,088 sc: 519 sc along each edge between the corners plus 3 sc at each corner)
Border Rnd 2: Sl st to the center sc of any corner, ch 1, *(sc, ch 11, sc) in center corner sc, sk next sc, sc in first st of the edge, (ch 9, sk 6 sts, sc in next st) 74 times, sk next corner sc; rep from * around, sl st in first sc to join. (296 ch-9 lps: 74 on each edge, 4 ch-11 corner lps)
Border Rnd 3: Sl st in first ch-11 lp, ch 1, *16 sc in corner lp, 12 sc in each of the next 74 ch-9 lps, skipping every sc between the lps; rep from * around, sl st in first sc to join. Fasten off. (3,616 sc: 3,552 sc in the edge rings plus 64 sc in the corner rings)
For other sizes, each edge in Border Rnd 1 has (squares along the edge x 64) plus (squares minus 1) sc between the corners. Subtract 1 and divide by 7 to get the number of ch-9 rings on that edge; add or skip one sc near the corner if needed so it divides evenly.

Assembly Instructions

  1. Make one Wheel Ring Square, block it and check that it measures about 12 inches across.
  2. Make all 64 squares, weaving in the two ends of each square as you finish it.
  3. Block the squares in batches, rounding out every padded ring and pinning the corners square.
  4. Lay the squares out in a straight grid of 8 across and 8 down.
  5. Join the squares wrong sides together with single crochet, first in rows and then in columns.
  6. Work Border Rounds 1 to 3 around the whole bed cover to add the big padded ring scallops.
  7. Block the finished bed cover flat, shaping each border ring into a round curve, and let it dry completely.

Common Mistakes & How to Fix Them

The most common mistake is working the wheel rounds in both loops instead of the back loop only. When you do this, the ridges disappear and the wheel looks flat and plain, without the pretty concentric lines. It is easy to slip back into your normal habit after a few stitches. Look at the wheel after Round 5: you should see a clear line of front loops around every wedge. If you do not see it, pull the round back and redo it in the back loops. Those ridges are what give each wheel its soft, sunburst texture.

Another mistake is forgetting the increases at the edges of each wedge, so the wheel cups and will not lie flat. Each wedge must grow by two stitches every round, with 2 dc in the first and last stitch. If you miss an increase, the wheel pulls tight and curls up like a bowl, and the squaring round will not fit. Count the stitches in each wedge after every round: 5, then 7, 9 and 11. Lay the wheel flat after Round 8 and check that it is round and smooth before you start the shaping round.

Many makers pack the padded rings unevenly, so some rings look fat and others look thin. If you work 9 sc in one loop and 11 in the next, the frame looks bumpy and the sides of the square end up different lengths. Always work exactly 10 sc in each ch-7 loop and 6 sc on each side of the corner rings. Push the stitches together gently along the chain as you go, so they cover the whole loop evenly. Count the stitches on each side at the end of Round 11 before moving on.

The last common mistake is making the chain loops in Round 10 too tight or too loose. Tight chains make small, stiff rings that pull the square in at the sides. Loose chains make large, floppy rings that flop over and lose their round shape. Chain at an even tension and check that each loop reaches neatly from one sc to the next without pulling. If the square puckers after Round 11, go up half a hook size for Round 10 only. If the rings flop, go down half a size or chain a little more firmly.


Denise

Denise is a crochet designer who loves turning textured wheel squares into cozy heirloom bed covers and home pieces.



Important Notes

Gauge matters because the squares are large, and small differences add up. A blocked square should measure about 12 inches across. If yours is half an inch larger, the bed cover will grow by 4 inches in each direction. Make one test square and block it before you buy all of your yarn. Compare new squares to your first one every few weeks, because tension often changes during a long project.

Blocking flattens the wheel, opens the spoke lines and rounds out the padded rings. Pin each square flat at 12 inches, placing pins at the corners and in the center of each ring to keep it open, then mist with cool water and let it dry fully. After joining and working the border, block the whole cover again, shaping each border ring into a smooth curve so the scallops hang evenly over the sides of the bed.

The yarn amount is for the queen size in worsted weight cotton, so adjust it for other sizes or yarns. Padded rings use a lot of yarn, so do not skimp on the extra. With a single color like rose pink, dye lots matter a great deal, because pink can lean coral or mauve from one lot to the next. Buy all of your yarn from the same dye lot at once, plus about 10 percent extra.

Wash the bed cover by hand or on a gentle cold cycle inside a large mesh laundry bag. Pink dyes can fade or release a little color, so wash the cover on its own and add a color catcher sheet to the first few washes. Use a mild detergent and no bleach. Do not hang the cover to dry, because wet cotton is heavy and will stretch the rings. Lay it flat on towels, shape the wheels and rings and let it dry fully.


I hope this rose pink wheel ring bed cover brings a soft, romantic glow into your bedroom. With only 64 large squares, it comes together faster than you might think, and every square is a calm, happy evening with one lovely color. Enjoy the rhythm of the ridges and the fun of watching the rings plump up.

You do not have to think about the whole bed cover today. Just make a magic ring and finish one wheel. Then square it up and frame it with rings. Before long, you will have a stack of pink squares ready to join, and one day they will cover your whole bed. Happy crocheting, my friend.

Crochet Abbreviations

01 ch — chain
02 sc — single crochet
03 hdc — half double crochet
04 dc — double crochet
05 tr — treble crochet
06 blo — back loop only
07 sl st — slip stitch
08 MR — magic ring
09 beg — beginning
10 sk — skip
11 st(s) — stitch(es)
12 lp(s) — loop(s)
13 sp(s) — space(s)
14 rep — repeat
15 Rnd — round

You Ask, We Answer

What is the finished size of this bed cover?

The queen version finishes at about 102 by 102 inches with the padded ring border. That is 8 squares across and 8 squares down, with each square measuring about 12 inches across after blocking, plus about 3 inches of border on every side. On a standard queen mattress, the cover lies across the top and drops about 21 inches on each side and at the foot, so the ring scallops reach toward the floor on most bed frames. If you prefer a shorter drop, use the full layout of 7 by 8 squares. If your bed is taller or longer, add another row of squares. Measure your own bed, including the mattress and frame height, and divide by your blocked square size before buying all of your yarn from one dye lot.

Can I use a different yarn weight or make a different size?

Yes, this pattern works in many yarn weights because the square keeps the same stitch counts in every size. In DK cotton with a 3.5 mm hook, each square is about 10 inches across, and in bulky yarn with a 6 mm hook it grows to about 15 inches. Only the number of squares changes. Make one test square in your chosen yarn, block it and measure it, then divide your bed size by that number. The section on switching things up lists square counts for twin, full, queen, king, a throw and a baby blanket. For the border, count 64 sc for each square along an edge plus one at each seam, then subtract 1 and divide by 7 to find the number of rings on that edge. Add or skip one stitch near the corner if needed.

How do I wash and care for this crochet bed cover?

Wash it by hand in cool water or on a gentle cold cycle inside a large mesh laundry bag to protect the wheels and the padded rings. Use a mild detergent and never use bleach, because it can fade the pink unevenly and weaken the cotton. Wash the cover on its own and add a color catcher sheet to the first few washes, since pink dyes can release a little color. Do not wring or twist the cover. Gently press out the water, then lay it flat on clean towels, open each ring with your fingers and shape the wheels and scallops. Let it dry completely, away from direct sunlight, which can fade pink over time. Never hang it while wet, because the weight of the wet cotton will stretch the rings. Between seasons, fold it loosely and store it in a breathable cotton bag.